Superlight Press Fit 4630 (Plastic) Steel Bottom Bracket
PRESSFIT BEARING TO FIT 46MM BB APERTURE FOR USE WITH 30MM AXLE CRANKSUSE SAME BEARING FOR ROAD & MTB APPLICATIONS
For use with Press fit 30 BB, BBright and BB386EVO systems to accomodate 30mm Axle Cranks.
This BB can be used with ...
PRESSFIT BEARING TO FIT 46MM BB APERTURE FOR USE WITH 30MM AXLE CRANKSUSE SAME BEARING FOR ROAD & MTB APPLICATIONS
For use with Press fit 30 BB, BBright and BB386EVO systems to accomodate 30mm Axle Cranks.
This BB can be used with ALL ROTOR 30MM AXLE CRANKS.
Rotor Press Fit30 PF30 4630 S...
PRESSFIT BEARING TO FIT 41MM BB APERTURE FOR USE WITH 30MM AXLE CRANKSUSE SAME BEARING FOR ROAD & MTB APPLICATIONS
For use with Press fit BB86 SYSTEMS. EXTENSIVELY USD BY GIANT, SCOTT AND SOME TREK BBSThis BB can be used with ALL ROTOR 30MM AXLE CRANKS.
Upgrade to a Ceramic 41-30 ...
PRESSFIT BEARING TO FIT 41MM BB APERTURE FOR USE WITH 24MM AXLE CRANKSUSE SAME BEARING FOR ROAD & MTB APPLICATIONS (MTB BB89 & BB92)
For use with Press fit BB86 SYSTEMS. EXTENSIVELY USED BY GIANT, SCOTT AND CanyonThis BB can be used with ALL ROTOR 24MM AXLE CRANKS.
Rotor PressFit 41-2...
Ok...so you have A specialized bike with OSBB ( which is 46mm Pressfit) and you want to run a 24mm axle crank then this is your best friend. The rigid threade sleeve and pull tight cups leave the BB area rock solid and hopefully lacking the creaks.
Designed as a proper bottom bracket BB for installing Campagnolo Ultra Torque cranks in either BB30, PF30, frames. Our patent pending design keeps the bearings outboard of the frame right on Campagnolo spec for greater rigidity and free of frame/c-clip tolerance issues that other systems deal w...
.jpg)
